SSD1821

Introduction

Advance Information
 
LCD Segment/ Common Driver with Controller

 

CMOS

 

SSD1820A/21 is a single-chip CMOS LCD driver with controller for a liquid crystal dot-matrix graphic display system. SSD1820A consists of 194 high voltage driving output pins for driving 128 Segments, 64 Commons and 2 icon driving Commons, while SSD1821 consists of 210 high voltage driving output pins for driving 128 Segments, 80 Commons and 2 icon driving Commons.

 

SSD1820A/21 displays data directly from its internal 128x65/128X81 bits Graphic Display Data RAM (GDDRAM). Data/Commands are sent from general MCU through a hardware selectable 6800-/8080-series compatible Parallel Interface or 3/4 wires Serial Peripheral Interface.

 

SSD1820A/21 embeds a DC-DC Converter, a LCD Voltage Regulator, an On-Chip Bias Divider and an On-Chip Oscillator which reduce the number of external components. With the special design on minimizing power consumption and die/package layout, SSD1820A/21 is suitable for any portable battery-driven applications requiring a long operation period and a compact size.
 

Contact our sales representative for more information:

Features

  • 128×64/80 Graphic Display with a Icon Line
  •  Programmable Multiplex ratio [16Mux – 65Mux/81Mux] (Partial Display)
  •  Single Supply Operation, 1.8 V – 3.0V
  •  Low Current Sleep Mode (<1.0uA)
  •  On-Chip Voltage Generator / External Power Supply
  •  Software selectable 2X / 3X / 4X / 5X / 6X On-Chip DC-DC Converter
  •  On-Chip Oscillator
  •  Software Selectable On-Chip Bias Dividers
  •  Programmable 1/4, 1/5, 1/6, 1/7, 1/8, 1/9 and 1/10 bias ratio
  •  Maximum +15.0V LCD Driving Output Voltage
  •  Hardware pin selectable for 8-bit 6800-series Parallel Interface , 8-bit 8080-series   Parallel Interface, 3-wire Serial Peripheral Interface or 4-wire Serial Peripheral Interface
  •  On-Chip 128 x 65/81 Graphic Display Data RAM
  •  Re-mapping of Row and Column Drivers
  •  Vertical Scrolling
  •  Display Offset Control
  •  64 Levels Internal Contrast Control
  •  External Contrast Control
  •  Maximum 17MHz SPI or 15MHz PPI operation
  •  Selectable LCD Driving Voltage Temperature Coefficients (2 settings)
  •  Available in Gold Bump Die and Standard TAB (Tape Automated Bonding) Package

Ordering Information

Ordering Part No. SSD1820AZ
Package Gold Bump Die
Pad Pitch/Outer Lead Pitch 64.8µm
Ordering Part No. SSD1821Z
Package Gold Bump Die
Pad Pitch/Outer Lead Pitch 64.8µm
Ordering Part No. SSD1820ATR1
Package TAB
Pad Pitch/Outer Lead Pitch 0.15mm
Ordering Part No. SSD1821TR1
Package TAB
Pad Pitch/Outer Lead Pitch 0.14mm
Ordering Part No. Package Pad Pitch/Outer Lead Pitch
SSD1820AZ Gold Bump Die 64.8µm
SSD1821Z Gold Bump Die 64.8µm
SSD1820ATR1 TAB 0.15mm
SSD1821TR1 TAB 0.14mm
This site is registered on wpml.org as a development site.