Introduction
Advance Information
128 RGB x 128 Dot Matrix
OLED/PLED Segment/Common Driver with Controller
CMOS
The SSD1351 is a CMOS OLED/PLED driver with 384 segments and 128 commons output, supporting up to 128RGB x 128 dot matrix display. This chip is designed for Common Cathode type OLED/PLED panel.
The SSD1351 has embedded Graphic Display Data RAM (GDDRAM). It supports with 8, 16, 18 bits 8080 / 6800 parallel interface, Serial Peripheral Interface. It has 256-step contrast and 262K color control, giving vivid color display on OLED panels.
Contact our sales representative for more information:
Features
- Resolution: 128RGB x 128 dot matrix panel
- 262k color depth supported by embedded 128x128x18 bit SRAM display buffer
- Power supply
– VDDIO= 1.65V – VCI (MCU interface logic level)
– VCI= 2.4V – 3.5V (Low voltage power supply)
– VCC= 10.0V – 18.0V (Panel driving power supply)
- Segment maximum source current: 200µA
- Common maximum sink current: 70mA
- 256 step brightness current control for the each color component plus 16 step master current control
- Pin selectable MCU Interfaces:
– 8/16/18 bits 6800-series parallel interface
– 8/16/18 bits 8080-series parallel interface
– 3-wire and 4-wire Serial Peripheral Interface
- Support various color depths
– 262k color (6:6:6)
– 65k color (5:6:5)
- Gamma Look Up Tables (GLUT) with 8 bit entry
- Row re-mapping and Column re-mapping
- Vertical and horizontal scrolling
- Programmable Frame Rate and Multiplexing Ratio
- On-chip Oscillator
- Color Swapping Function (RGB-BGR), arranged in RGB sequence when reset
- Slim chip layout for COF
-
Operating temperature range -40ºC to 85ºC
Ordering Information
| Ordering Part No. | SSD1351Z |
| Package | COG |
| Ordering Part No. | SSD1351UR1 |
| Package | COF |
| Ordering Part No. | Package |
|---|---|
| SSD1351Z | COG |
| SSD1351UR1 | COF |