SSD2861

General

• Support panel with resolution up to WQXGA (2560 x 1800) at a refresh rate of 60Hz.
• Support 18, 24-bit per pixel color.
• Seamless bridging of eDP protocol to MIPI DSI protocol for power-on and sleep-in/out sequence.
• Auto insertion of black frames when video link from eDP source is off.
• Support external EDID. External EDID is read from EEPROM (max. 16Kbit) via I2C interface.
• Support the use of external I2C EEPROM (32Kbits) for configuring SSD2861.
• 4 GPO pins for general purpose control.
• Support MIPI and eDP lane/polarity static swap.
• Support MIPI DSI static swap for dual DSI output.
• Power Supply: 1.2V and 1.8V
• Built-in DC-DC for 3.0V IO supply (required for HPD pin).
• 88 Leads QFN package with 0.4mm pitch.

eDP RX

• Compliant to VESA’s DisplayPort Specification version 1.2a.
• Compliant to VESA Embedded DisplayPort (eDP™) Specification 1.2.
• Support 1, 2 or 4-lane configuration on the eDP Main Link.
• Support eDP receive link rate of 1.62 Gbps and 2.7 Gbps.
• Support AUX channel link up to 1Mbps.
• Support full link training, and fast link training.
• Support adaptive equalizer with 3 level of pre-emphasis.
• Support 3 levels of differential voltage swing.
• Support Spread spectrum clocking.
• Support Backlight Control through PWM output.
• BIST generator outputs test pattern.

MIPI DSI TX

• Compliant to MIPI DSI standard for DPHY (v1.01) DSI (v1.01) and DCS (v1.02).
• Send MIPI DCS/Generic commands for write and read access via standard I2C, SPI or I2C-over-AUX interfaces.
• Support 1, 2, 3 or 4-lane configuration.
• Support Video mode output.
• Support MIPI transmit link rate up to 1Gbps per lane.
• Support maximum of 8Gbps using 2 MIPI DSI TX output in 4-lane configuration.
• Support independent bi-directional access for each DSI.
• Support ultra low power mode.