簡介
SSD2092 is a new TDDI (Touch Display Driver IC) integrating touch sensing and display driving schemes for optimal touch and display performance. It supports Thin Film Transistor (TFT) LCD panels with resolution of up to 1080RGB X 1920 (Full HD resolution). SSD2092 displays 16.7M vivid colors, and supports 1082 source outputs plus high voltage gate control signal for GIP design.
Supporting MIPI serial interface, SSD2092 enables ultra low power (<2.6mW) during sleep mode for log-on and gesture wake up. Its outstanding features also include high performance multi-touch, low latency, ultra-fast response (reporting rate 120Hz), high Signal-to-Noise Ratio (SNR) of up to 52dB, superior linearity of up to ± 0.5 mm, excellent water-proof performance and low charging noise. It supports 1mm stylus and also enables slim and compact module design.
Contact our sales representative for more information:
Features
Display
- Solution for Full HD TFT display
- 1082 source channels supporting : 1080RGB, 1024RGB, 960RGB, 900RGB configurations
- Supports 4N row resolutions of gate outputs in panel.
- Display color modes
- 16.7M colours (24-bit 8(R):8(G):8(B))
- 262k colours (18-bit 6(R):6(G):6(B))
- 65k colours (16-bit 5(R):6(G):5(B))
- 8 colors (Idle mode on): 8 colors (3-bit binary mode)
- Supports column inversion /Zig-Zag
Touch
- Low Power Touch Standby mode
- Supports max 576 touch nodes sensing signal plus 4 touch keys
- Supports both Vblank and Hblank touch sensing mode.
Interface
- System Interfaces:
- MIPI DSI (version 1.1) with D-PHY (version 1.1)
- Support video mode
- Command set compliant with MIPI DCS Version 1.01.00
- 2/3/4 data lanes and 1 clock lane (Lane number can be selected by register/OTP)
Power
- Power Supply:
- VDDIO =1.65V – 3.60V
- DDVDH =4.5V – 6V
- DDVDL =-4.5V – -6V
- TVDD = 4.5V – 6V
- Maximum Gate Driving Output Voltage: 30V p-p
- Maximum VGH – VGL: 30V p-p
- Source Driving Output Voltage: +/-5.7V
- VCOM= 2V ~ -3V, each step=10mV
- Voltage Regulator for source
- VCOM voltage generator
- Low Current Sleep Mode and 8-color display mode for power saving
Function
- DC/DC Converter
- Supports DC-VCOM
- Source scan direction control
- Programmable Gamma Correction Curve
- Separate RGB Gamma Curve
- CABC Dynamics Backlighting control with PWM output
- Color Enhancement Function (Contrast, Brightness, Sharpness, Selective color correction, saturation enhancement, sunlight readability and skin color detection)
- Programmable GIP Signals
- Max 4 times OTP for VCOM calibration and manufacturing ID
- Max 4 times Gamma program
- 1 time OTP memory to store initialization register settings (Power, GIP and Gamma etc.)
- GPIO pins for power chip control
- Available in COG package
Ordering Information
| Ordering Part No. | SSD2092 |
| Source | 1080 + 2 |
| Gate | HV gate control signal |
| Package | Gold Bump Die |
| Remark | CMP, 170um die thickness |
| Ordering Part No. | Source | Gate | Package | Remark |
|---|---|---|---|---|
| SSD2092 | 1080 + 2 | HV gate control signal | Gold Bump Die | CMP, 170um die thickness |