SSD1322

简介

Advance Information
 
480 x 128, Dot Matrix High Power OLED/PLED
Segment/Common Driver with Controller

 

CMOS

 

 

SSD1322 is a single-chip CMOS OLED/PLED driver with controller for organic/polymer light emitting diode dot-matrix graphic display system. It consists of 480 segments and 128 commons. This IC is designed for Common Cathode type OLED/PLED panel.
 
SSD1322 displays data directly from its internal 480 x 128 x 4 bits Graphic Display Data RAM (GDDRAM). Data/Commands are sent from general MCU through the hardware selectable 6800-/8080-series compatible Parallel Interface or Serial Peripheral Interface. This driver IC has a 256 steps contrast control and can be widely used in many applications such as automotive and industrial control panel.

Contact our sales representative for more information:

Features

  • Resolution: 480 x 128 dot matrix panel
  • Power supply 

– VDD= 2.4V – 2.6V     (Core VDD power supply, can be regulated from VCI)

– VDDIO= 1.65V – VCI   (MCU interface logic level)

– VCI= 2.4V – 3.5V      (Low voltage power supply)

– VCC= 10.0V – 20.0V  (Panel driving power supply)

  • When VCI is lower than 2.6V, VDD should be supplied by external power source
  • For matrix display

– Segment maximum source current: 300µA

– Common maximum sink current: 80mA

– 256 step contrast brightness current control, 16 step master current control

  • 16 gray levels supported by embedded 480x128x4 bit SRAM display buffer
  • Selectable MCU Interfaces

– 8-bit 6800/8080-series parallel interface

– 3/4-wire Serial Peripheral Interface

  • Selectable Common current sinking mode

– Dual COM mode

– Single COM mode

  • 8-bit programmable Gray Scale Look Up Table
  • High Power Protection
  • Programmable Frame Rate and Multiplexing Ratio
  • Row re-mapping and Column re-mapping
  • Sleep mode current <10µA with ram data kept
  • Operating temperature range -40ºC to 85ºC
     

Ordering Information

Ordering Part No. SSD1322Z2
Package Gold Bump Die
Ordering Part No. SSD1322UR1
Package COF
Ordering Part No. Package
SSD1322Z2 Gold Bump Die
SSD1322UR1 COF
This site is registered on wpml.org as a development site.